Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Temecula?
Spring replacement in Temecula typically runs $180 to $340, and most torsion spring jobs are finished the same day. That range covers removing the broken springs and installing new ones rated for your door’s weight; if the cables or bearings are worn out too, expect the top end. A garage door with two springs usually lands near the middle of that range.
We’re Old Glory Garage Door, and spring work is most of what we do. Every technician is trained on the eight major door and opener brands homeowners actually own – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so we can diagnose whether the spring, the cable, or the opener is the real problem before we quote anything. Whatever brand is on your door, we know it.
If your door won’t lift or you heard a loud bang from the garage, don’t run the opener again. Call (877) 522-1085 and we’ll give you a free estimate on the spot.
Key Takeaways
- Typical spring replacement in Temecula: $180 – $340, same-day in most cases.
- A broken spring is a safety issue, not a DIY fix. High-tension springs and cables can injure or kill if handled wrong.
- How long your spring lasts depends on door weight and how often you use it, not just age.
- If the spring is gone, the opener may also need a look – we check both so you don’t pay twice.
- Free estimates, straight answers, and the price we quote is the price you pay.
Spring Replacement Cost Breakdown (2026)
Here’s how spring replacement breaks down in the Temecula market this year. Prices reflect what we bill locally and what you should expect from any reputable specialist in the area.
| Line Item | Typical Cost |
|---|---|
| Spring repair / replacement (single or double torsion) | $180 – $340 |
| Extension spring replacement | $150 – $280 (part of the repair range) |
| Cable repair if cables are frayed or snapped | $130 – $250 |
| Roller replacement if rollers are worn | $110 – $220 |
| Track realignment if the door came off track | $120 – $240 |
| Opener repair if the motor was driven against a broken spring | $120 – $320 |
| Opener installation if the old one is beyond repair | $250 – $550 |
| Panel replacement for damaged sections | $250 – $500 |
| Full system repair (spring plus related hardware) | $150 – $600 |
What pushes a spring job to the top of the range? Two springs instead of one, a heavy wood door, or worn cables and bearings discovered once the tension comes off. What keeps it low? A standard single-door spring with everything else in good shape. We replace springs rated to your door’s actual weight, and we test the balance before we leave. You won’t get a return visit because we guessed at the size.
One thing worth flagging: if your opener ran while the spring was broken, the opener gear or the motor coupling may also be damaged. We check the opener as part of the same visit so you’re not paying a second diagnostic fee a week later.
What Affects Spring Replacement Pricing in Temecula
- Door type and weight. A standard single-car steel door from Clopay or Amarr takes a lighter spring than a heavy double-car wood or insulated door. Heavier doors mean thicker wire and a higher spring cost.
- Number of springs. Most two-car doors here use two torsion springs. Replacing both is normal, and pricing reflects it. Replacing one and leaving the other is a false economy.
- Spring cycle rating. A standard 10,000-cycle spring costs less than a high-cycle upgrade. If your door gets used a dozen times a day because everyone leaves through the garage, the upgrade is worth pricing out.
- Access and garage layout. A tight single-car garage in a Temecula cul-de-sac means moving ladders and vehicles before the work starts. Clear space keeps the visit fast, which keeps the price at the low end.
- Condition of cables, rollers, and tracks. Springs rarely fail alone. If the cables are frayed or the rollers are flat-spotted, we’ll show you before we touch anything and quote the add-on separately.
- Temperature swings. Temecula’s summer heat (many afternoons push past 100) and cool winter mornings both work a spring. The metal expands and contracts, and the daily cycles add up. Springs on sun-facing west-side doors here tend to wear faster than the book says.
How to Save on Spring Replacement
A few practical ways to keep the cost down without cutting corners:
- Fix a broken spring before you run the opener. Running the motor against a dead spring can damage the opener gear, and that turns a $180 – $340 job into a spring plus opener repair at $120 – $320 on top.
- Replace both springs at once. If one torsion spring snapped, the other is at the same wear point. Swapping one leaves you calling us back in weeks.
- Ask for a high-cycle spring if your door is used hard. It costs more up front but lasts longer under a busy household. The math works out for most families.
- Bundle worn hardware in the same visit. Rollers at $110 – $220 and cables at $130 – $250 are cheaper to add while we’re already in the garage than to book separate trips for.
- Get the free estimate first. Call (877) 522-1085 and we’ll quote before any work starts. No pressure, no upsell, and the number doesn’t change once we’re on site.
If you want to compare against the wider service, our home page lays out the full scope of repair, opener work, and installation. And if you’re nearby in the foothills, our Spring Replacement in Portola Hills page covers that market’s pricing in detail.
Is Spring Replacement Cheaper Than a New Door in Temecula?
Yes, by a wide margin. Spring replacement at $180 – $340 is a fraction of a new door system, which runs $700 – $2,200 installed. A new door only makes sense when the panels, tracks, and hardware are all failing together or you want a different look. For a door that’s structurally sound with a snapped spring, repairing is almost always the right call.
We diagnose before we recommend. If a door just needs the spring, we say so – even when a new door would earn us more. Straight answers, fair price, done right. Call (877) 522-1085 for a free estimate.
Can You Replace a Broken Spring the Same Day?
Yes, in most cases we can replace a broken spring the same day you call. Torsion springs for standard residential doors are common parts, and our trucks carry the sizes that fit the brands we service, including Clopay, Amarr, Wayne Dalton, and Raynor doors. If your setup needs a specialty spring, we’ll tell you up front and get you on the schedule.
Same-day work is why we keep our techs focused on door systems alone. We’re not a general handyman outfit squeezing you between drywall patches. One call covers the spring, the opener check, and anything else the door needs.
What Signs Mean You Need Spring Replacement?
Loud bang from the garage, a door that won’t lift, or a door that lifts partway and stops – those are the usual signs a torsion spring has failed. You may also see a visible gap in the coil above the door, or the door feels unusually heavy when you try to lift it by hand.
Less obvious: the door drifts down a few inches on its own when left half-open, or the opener strains and hums before it moves. Those often mean a spring is weakening, not fully broken. Catch it early and the repair stays at the low end of the $180 – $340 range.
A safety note: high-tension springs and the cables under them store serious force. A torsion spring under load can cause severe injury if it releases unexpectedly. Don’t cut, unwind, or try to remove one yourself – this is work for a trained professional with the right tools. We’ll handle it safely.
Do All Garage Door Springs Cost the Same?
No. Spring cost depends on wire thickness, cycle rating, and length, which is tied to your door’s weight. A high-cycle spring costs more than a standard one, and a heavy double-car door needs a heavier gauge than a single-car door. That’s why quotes for the same job can vary – it’s not the labor, it’s the part.
We size the spring to your actual door, not a one-size guess. If you’ve been quoted a price that’s far below the $180 – $340 range, ask what spring they’re installing. A too-light spring will fail early and put you right back where you started.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Temecula?
Spring replacement in Temecula typically costs $180 to $340. The low end is a single standard spring with everything else in good condition; the top end covers two springs, heavier door hardware, or replacing worn cables and bearings in the same visit. Call (877) 522-1085 for a free estimate on your specific door.
Can you repair just one spring or do I need both replaced?
You can repair just one, but we recommend replacing both at once. When one torsion spring snaps, the other is at the same wear point and usually fails within weeks. Replacing both now costs far less than two separate visits. We’ll quote both options and let you decide – no pressure.
Is it cheaper to repair the spring or replace the whole door?
Repair is almost always cheaper. Spring replacement at $180 – $340 is far less than a new door installation at $700 – $2,200. A new door only makes sense when the panels, tracks, and hardware are failing together, or you want a different style. On a sound door, repair is the right move. Call (877) 522-1085 and we’ll tell you honestly which one you need.
Can you come out today for a broken spring?
In most cases, yes. We aim to handle broken springs the same day you call, and our trucks carry the common spring sizes for the major brands. If we can’t make it the same day, we’ll give you a clear window and a firm price. Call (877) 522-1085 – estimates are free.
Why did my spring break so fast?
Most springs break early because of cycle count or a spring that’s undersized for the door. Every open and close is one cycle, and a busy household runs the door far more than they realize. Temecula’s heat also speeds up wear on west-facing doors. If your spring failed well under its rated life, the part may have been too light for your door – we’ll check and size it correctly.
Do you work on my brand of door or opener?
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – the eight brands that cover almost every residential door and opener in Temecula. We’re not tied to one brand, so you don’t hear “we don’t work on that.” Whatever’s on your door, we know it. Call (877) 522-1085 to confirm your model.
Is a broken spring dangerous?
Yes. A torsion spring under tension stores enough force to cause serious injury if it lets go while you’re working on it. The cables under it are just as dangerous. Don’t try to remove or adjust one yourself. Call a trained technician – we carry the tools and the experience to do it safely.
Pricing reflects the Temecula market as of 2026. Old Glory Garage Door offers free estimates – call (877) 522-1085.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Tariq Haddad"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Roger Whitaker"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Todd Rhodes